page 1 of 3 the big deal ? low insertion loss with excellent power handling ? passbands up to 6 ghz ? fractional bandwidth from 3 to 25% ? low profle designs with min. height of 0.120 ? excellent temperature stability ? rugged construction to handle demanding environmental conditions product overview mini-circuits coaxial-ceramic resonator flters offer low insertion loss in very small form factors, using ceramic material with high dielectric constant and superior q factor. bandpass and bandstop flters,diplexer and multiplexer designs can be constructed using this technology. low insertion loss combined with excellent power handling makes these flters well suited for transmitter and receiver signal chains. advanced flter design and construction can achieve stopband width greater than 3x the center frequency all our coaxial-ceramic resonator flters are built with rugged construction, qualifed to withstand multiple demanding reflow cycles. custom integrated assembly with lna in greatly simplifying system integration. they can be realized in small form factors with high-quality, precise machining for applications where size is critical. excellent repeat - ability across units is achieved through precise tuning and process control. key features 50 ? dc to 6 ghz coaxial-ceramic resonator filters and multiplexers coaxial feature advantages low insertion loss low signal loss results in better snr in signal chain fast roll-off higher selectivity results in better adjacent channel rejection and dynamic range wide stop band wide spur-free stopband results in better receiver sensitivity excellent power handling well suited for transmitter applications rugged construction these flter assemblies have been qualifed over a wide range of thermal, mechanical and environ - mental conditions including withstanding the stress of extensive solder reflow cycles small size very well suited for high performance applications where size is a constraint. temperature stability very minimal change in electrical performance across temperature makes these flters suitable for a wide range of operating conditions. notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
coaxial ZX75BP-1090+ electrical specifcations at 25c parameter f# frequency (mhz) min. typ. max. unit pass band center frequency - - - 1090 - mhz insertion loss f1-f2 1060-1120 - 1.1 2 db vswr f1-f2 1060-1120 - 1.3 - :1 stop band, lower insertion loss dc-f3 dc - 955 20 35 - db vswr dc-f3 dc - 955 - 20 - :1 stop band, upper insertion loss f4-f5 1255-2200 20 30 - db vswr f4-f5 1255-2200 - 20 - :1 maximum ratings operating temperature -40c to 85c storage temperature -55c to 100c rf power input* 5 w max. * passband rating, derate linearly to 3.5w at 85.c ambient. permanent damage may occur if any of these limits are exceeded. rev.or m163307 ZX75BP-1090+ edu2731 urj 171031 page 2 of 3 typical frequency response functional schematic typical performance data at 25 c dc f3 f1 f2 frequency (mhz) insertion loss (db) f4 f5 rf in rf out 50 ? 1060 to 1120 mhz bandpass filter 0 25 50 75 100 0 440 880 1320 1760 2200 insertion loss (db) frequency (mhz) ZX75BP-1090+ insertion loss (full band) 1 10 100 1000 10000 0 440 880 1320 1760 2200 vswr frequency (mhz) ZX75BP-1090+ vswr 1.0 1.2 1.4 1060 1090 1120 0 10 20 30 40 950 1000 1050 1100 1150 1200 1250 1300 insertion loss (db) frequency (mhz) ZX75BP-1090+ insertion loss (pass band) 1.0 1.1 1.2 1060 1090 1120 1 10 100 1000 10000 0 440 880 1320 1760 2200 vswr frequency (mhz) ZX75BP-1090+ vswr 1.0 1.2 1.4 1060 1090 1120 applications ? traffc collision avoidance system (tcas) ? aeronautical radio navigation ? fixed satellite ? radio astronomy ? radar and navigation system features ? low insertion loss ? high selectivity ? good vswr ? connectorized package case style: hy1238 connectors model sma-m\f ZX75BP-1090-s+ frequency (mhz) insertion loss (db) vswr (:1) frequency (mhz) group delay (nsec) 1 111.72 5431.57 1060 8.62 500 69.80 283.51 1064 8.29 955 36.83 58.90 1069 7.97 972 30.22 48.71 1072 7.82 995 20.47 31.78 1076 7.64 1015 10.75 13.06 1078 7.58 1032 3.38 3.06 1080 7.51 1060 1.14 1.08 1082 7.45 1080 1.06 1.15 1086 7.34 1090 1.06 1.20 1088 7.30 1105 1.09 1.27 1090 7.26 1120 1.12 1.30 1092 7.23 1158 3.62 3.79 1095 7.19 1163 5.02 5.53 1097 7.17 1180 10.76 16.88 1100 7.15 1212 20.52 47.98 1103 7.14 1255 30.23 71.80 1106 7.14 1440 72.37 86.11 1110 7.17 1800 45.10 79.06 1115 7.24 2200 40.31 77.46 1120 7.37 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
ZX75BP-1090+ outline drawing input sma-male output sma-female coaxial connections inch mm outline dimensions ( ) page 3 of 3 f g 4x k l m 4x ?n in out sma female conn. sma male conn. a j h b c d e a 1.20 30.48 b .75 19.05 c .46 11.68 d 1.18 29.97 e .04 1.02 f .17 4.32 g 1.00 25.40 h .50 12.70 j .35 8.89 k .18 4.57 l .21 5.28 m 2.05 52.07 n .106 2.69 wt. grams 35.0 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com bandpass filter
|
